I recently discovered this dish brush dispenser and immediately liked how practical it was. It makes washing dishes much easier without constantly getting my hands wet. The only issue was that the brush had nowhere to dry properly. The sponge and bristles stayed wet after use, which could eventually deform the brush or lead to mold buildup. To solve this, I designed a simple custom stand in Fusion 360 and 3D printed it. The goal was to keep the brush upright while collecting

Recently I picked up a pack of dual-sided acrylic markers — all neatly packed in a box. But … it is not the easiest to use. Every time I wanted a colour, I had to dig around. Putting them back was just as awkward, and seeing all the colours at once is almost impossible. So I thought — why not make something better? Inspired by something surprisingly simple (toothbrush holders 🪥), I designed a first prototype using Autodesk Fusion 360 — a single row holder to test if the mark

Finally got time to fix my A1 Mini after a hotend clumping🪛 I followed a repair guide found in YouTube and here’s the quick breakdown： 🛠️ What I did (briefly): • Heated the nozzle with maintenance mode to soften the plastic • Carefully removed the clumped filament • Disassembled the hotend step by step • Cleaned everything thoroughly • Cooled the nozzle to room temperature • Reassembled 🌟 Some important tips: • Wear proper heat-resistant gloves🧤 – the nozzle goes up to 25